Viewing file: 
fs.h (14.79 KB) -rw-r--r--Select action/file-type:
(
+) |
(
+) |
(
+) |
Code (
+) |
Session (
+) |
(
+) |
SDB (
+) |
(
+) |
(
+) |
(
+) |
(
+) |
(
+) |
#ifndef _LINUX_FS_H
#define _LINUX_FS_H
/*
* This file has definitions for some important file table
* structures etc.
*/
#include <linux/limits.h>
#include <linux/ioctl.h>
#include <linux/blk_types.h>
#include <linux/types.h>
/*
* It's silly to have NR_OPEN bigger than NR_FILE, but you can change
* the file limit at runtime and only root can increase the per-process
* nr_file rlimit, so it's safe to set up a ridiculously high absolute
* upper limit on files-per-process.
*
* Some programs (notably those using select()) may have to be
* recompiled to take full advantage of the new limits..
*/
/* Fixed constants first: */
#undef NR_OPEN
#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
#define BLOCK_SIZE_BITS 10
#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
#define SEEK_SET 0 /* seek relative to beginning of file */
#define SEEK_CUR 1 /* seek relative to current file position */
#define SEEK_END 2 /* seek relative to end of file */
#define SEEK_MAX SEEK_END
struct fstrim_range {
__u64 start;
__u64 len;
__u64 minlen;
};
/* And dynamically-tunable limits and defaults: */
struct files_stat_struct {
unsigned long nr_files; /* read only */
unsigned long nr_free_files; /* read only */
unsigned long max_files; /* tunable */
};
struct inodes_stat_t {
int nr_inodes;
int nr_unused;
int dummy[5]; /* padding for sysctl ABI compatibility */
};
#define NR_FILE 8192 /* this can well be larger on a larger system */
#define MAY_EXEC 1
#define MAY_WRITE 2
#define MAY_READ 4
#define MAY_APPEND 8
#define MAY_ACCESS 16
#define MAY_OPEN 32
#define MAY_CHDIR 64
/*
* flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond
* to O_WRONLY and O_RDWR via the strange trick in __dentry_open()
*/
/* file is open for reading */
#define FMODE_READ ((fmode_t)0x1)
/* file is open for writing */
#define FMODE_WRITE ((fmode_t)0x2)
/* file is seekable */
#define FMODE_LSEEK ((fmode_t)0x4)
/* file can be accessed using pread */
#define FMODE_PREAD ((fmode_t)0x8)
/* file can be accessed using pwrite */
#define FMODE_PWRITE ((fmode_t)0x10)
/* File is opened for execution with sys_execve / sys_uselib */
#define FMODE_EXEC ((fmode_t)0x20)
/* File is opened with O_NDELAY (only set for block devices) */
#define FMODE_NDELAY ((fmode_t)0x40)
/* File is opened with O_EXCL (only set for block devices) */
#define FMODE_EXCL ((fmode_t)0x80)
/* File is opened using open(.., 3, ..) and is writeable only for ioctls
(specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL ((fmode_t)0x100)
/*
* Don't update ctime and mtime.
*
* Currently a special hack for the XFS open_by_handle ioctl, but we'll
* hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon.
*/
#define FMODE_NOCMTIME ((fmode_t)0x800)
/* Expect random access pattern */
#define FMODE_RANDOM ((fmode_t)0x1000)
/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */
#define FMODE_UNSIGNED_OFFSET ((fmode_t)0x2000)
/* File is opened with O_PATH; almost nothing can be done with it */
#define FMODE_PATH ((fmode_t)0x4000)
/* File was opened by fanotify and shouldn't generate fanotify events */
#define FMODE_NONOTIFY ((fmode_t)0x1000000)
/*
* The below are the various read and write types that we support. Some of
* them include behavioral modifiers that send information down to the
* block layer and IO scheduler. Terminology:
*
* The block layer uses device plugging to defer IO a little bit, in
* the hope that we will see more IO very shortly. This increases
* coalescing of adjacent IO and thus reduces the number of IOs we
* have to send to the device. It also allows for better queuing,
* if the IO isn't mergeable. If the caller is going to be waiting
* for the IO, then he must ensure that the device is unplugged so
* that the IO is dispatched to the driver.
*
* All IO is handled async in Linux. This is fine for background
* writes, but for reads or writes that someone waits for completion
* on, we want to notify the block layer and IO scheduler so that they
* know about it. That allows them to make better scheduling
* decisions. So when the below references 'sync' and 'async', it
* is referencing this priority hint.
*
* With that in mind, the available types are:
*
* READ A normal read operation. Device will be plugged.
* READ_SYNC A synchronous read. Device is not plugged, caller can
* immediately wait on this read without caring about
* unplugging.
* READA Used for read-ahead operations. Lower priority, and the
* block layer could (in theory) choose to ignore this
* request if it runs into resource problems.
* WRITE A normal async write. Device will be plugged.
* WRITE_SYNC Synchronous write. Identical to WRITE, but passes down
* the hint that someone will be waiting on this IO
* shortly. The write equivalent of READ_SYNC.
* WRITE_ODIRECT Special case write for O_DIRECT only.
* WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush.
* WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on
* non-volatile media on completion.
* WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded
* by a cache flush and data is guaranteed to be on
* non-volatile media on completion.
*
*/
#define RW_MASK REQ_WRITE
#define RWA_MASK REQ_RAHEAD
#define READ 0
#define WRITE RW_MASK
#define READA RWA_MASK
#define READ_SYNC (READ | REQ_SYNC)
#define READ_META (READ | REQ_META)
#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
#define WRITE_ODIRECT (WRITE | REQ_SYNC)
#define WRITE_META (WRITE | REQ_META)
#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
#define SEL_IN 1
#define SEL_OUT 2
#define SEL_EX 4
/* public flags for file_system_type */
#define FS_REQUIRES_DEV 1
#define FS_BINARY_MOUNTDATA 2
#define FS_HAS_SUBTYPE 4
#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */
#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move()
* during rename() internally.
*/
/*
* These are the fs-independent mount-flags: up to 32 flags are supported
*/
#define MS_RDONLY 1 /* Mount read-only */
#define MS_NOSUID 2 /* Ignore suid and sgid bits */
#define MS_NODEV 4 /* Disallow access to device special files */
#define MS_NOEXEC 8 /* Disallow program execution */
#define MS_SYNCHRONOUS 16 /* Writes are synced at once */
#define MS_REMOUNT 32 /* Alter flags of a mounted FS */
#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */
#define MS_DIRSYNC 128 /* Directory modifications are synchronous */
#define MS_NOATIME 1024 /* Do not update access times. */
#define MS_NODIRATIME 2048 /* Do not update directory access times */
#define MS_BIND 4096
#define MS_MOVE 8192
#define MS_REC 16384
#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence.
MS_VERBOSE is deprecated. */
#define MS_SILENT 32768
#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */
#define MS_UNBINDABLE (1<<17) /* change to unbindable */
#define MS_PRIVATE (1<<18) /* change to private */
#define MS_SLAVE (1<<19) /* change to slave */
#define MS_SHARED (1<<20) /* change to shared */
#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */
#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */
#define MS_I_VERSION (1<<23) /* Update inode I_version field */
#define MS_STRICTATIME (1<<24) /* Always perform atime updates */
#define MS_NOSEC (1<<28)
#define MS_BORN (1<<29)
#define MS_ACTIVE (1<<30)
#define MS_NOUSER (1<<31)
/*
* Superblock flags that can be altered by MS_REMOUNT
*/
#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION)
/*
* Old magic mount flag and mask
*/
#define MS_MGC_VAL 0xC0ED0000
#define MS_MGC_MSK 0xffff0000
/* Inode flags - they have nothing to superblock flags now */
#define S_SYNC 1 /* Writes are synced at once */
#define S_NOATIME 2 /* Do not update access times */
#define S_APPEND 4 /* Append-only file */
#define S_IMMUTABLE 8 /* Immutable file */
#define S_DEAD 16 /* removed, but still open directory */
#define S_NOQUOTA 32 /* Inode is not counted to quota */
#define S_DIRSYNC 64 /* Directory modifications are synchronous */
#define S_NOCMTIME 128 /* Do not update file c/mtime */
#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */
#define S_PRIVATE 512 /* Inode is fs-internal */
#define S_IMA 1024 /* Inode has an associated IMA struct */
#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */
#define S_NOSEC 4096 /* no suid or xattr security attributes */
/*
* Note that nosuid etc flags are inode-specific: setting some file-system
* flags just means all the inodes inherit those flags by default. It might be
* possible to override it selectively if you really wanted to with some
* ioctl() that is not currently implemented.
*
* Exception: MS_RDONLY is always applied to the entire file system.
*
* Unfortunately, it is possible to change a filesystems flags with it mounted
* with files in use. This means that all of the inodes will not have their
* i_flags updated. Hence, i_flags no longer inherit the superblock mount
* flags, so these have to be checked separately. -- rmk@arm.uk.linux.org
*/
#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg))
#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY)
#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \
((inode)->i_flags & S_SYNC))
#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \
((inode)->i_flags & (S_SYNC|S_DIRSYNC)))
#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK)
#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME)
#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION)
#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA)
#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND)
#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE)
#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL)
#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD)
#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME)
#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE)
#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE)
#define IS_IMA(inode) ((inode)->i_flags & S_IMA)
#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
/* the read-only stuff doesn't really belong here, but any other place is
probably as bad and I don't want to create yet another include file. */
#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
#define BLKRRPART _IO(0x12,95) /* re-read partition table */
#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
#if 0
#define BLKPG _IO(0x12,105)/* See blkpg.h */
/* Some people are morons. Do not use sizeof! */
#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
/* This was here just to show that the number is taken -
probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
#endif
/* A jump here: 108-111 have been used for various private purposes. */
#define BLKBSZGET _IOR(0x12,112,size_t)
#define BLKBSZSET _IOW(0x12,113,size_t)
#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
#define BLKTRACESTART _IO(0x12,116)
#define BLKTRACESTOP _IO(0x12,117)
#define BLKTRACETEARDOWN _IO(0x12,118)
#define BLKDISCARD _IO(0x12,119)
#define BLKIOMIN _IO(0x12,120)
#define BLKIOOPT _IO(0x12,121)
#define BLKALIGNOFF _IO(0x12,122)
#define BLKPBSZGET _IO(0x12,123)
#define BLKDISCARDZEROES _IO(0x12,124)
#define BLKSECDISCARD _IO(0x12,125)
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
#define FITHAW _IOWR('X', 120, int) /* Thaw */
#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IOC_GETVERSION _IOR('v', 1, long)
#define FS_IOC_SETVERSION _IOW('v', 2, long)
#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
#define FS_IOC32_GETVERSION _IOR('v', 1, int)
#define FS_IOC32_SETVERSION _IOW('v', 2, int)
/*
* Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
*/
#define FS_SECRM_FL 0x00000001 /* Secure deletion */
#define FS_UNRM_FL 0x00000002 /* Undelete */
#define FS_COMPR_FL 0x00000004 /* Compress file */
#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
#define FS_NODUMP_FL 0x00000040 /* do not dump file */
#define FS_NOATIME_FL 0x00000080 /* do not update atime */
/* Reserved for compression usage... */
#define FS_DIRTY_FL 0x00000100
#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
#define FS_ECOMPR_FL 0x00000800 /* Compression error */
/* End compression flags --- maybe not all used */
#define FS_BTREE_FL 0x00001000 /* btree format dir */
#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
#define FS_EXTENT_FL 0x00080000 /* Extents */
#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */
#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
#define SYNC_FILE_RANGE_WAIT_BEFORE 1
#define SYNC_FILE_RANGE_WRITE 2
#define SYNC_FILE_RANGE_WAIT_AFTER 4
#endif /* _LINUX_FS_H */
