Viewing file: 
SA-1101.h (30.19 KB) -rw-r--r--Select action/file-type:
(
+) |
(
+) |
(
+) |
Code (
+) |
Session (
+) |
(
+) |
SDB (
+) |
(
+) |
(
+) |
(
+) |
(
+) |
(
+) |
/*
* SA-1101.h
*
* Copyright (c) Peter Danielsson 1999
*
* Definition of constants related to the sa1101
* support chip for the sa1100
*
*/
/* Be sure that virtual mapping is defined right */
#ifndef __ASM_ARCH_HARDWARE_H
#error You must include hardware.h not SA-1101.h
#endif
#ifndef SA1101_BASE
#error You must define SA-1101 physical base address
#endif
#ifndef LANGUAGE
# ifdef __ASSEMBLY__
# define LANGUAGE Assembly
# else
# define LANGUAGE C
# endif
#endif
/*
* We have mapped the sa1101 depending on the value of SA1101_BASE.
* It then appears from 0xf4000000.
*/
#define SA1101_p2v( x ) ((x) - SA1101_BASE + 0xf4000000)
#define SA1101_v2p( x ) ((x) - 0xf4000000 + SA1101_BASE)
#ifndef SA1101_p2v
#define SA1101_p2v(PhAdd) (PhAdd)
#endif
#include <mach/bitfield.h>
#define C 0
#define Assembly 1
/*
* Memory map
*/
#define __SHMEM_CONTROL0 0x00000000
#define __SYSTEM_CONTROL1 0x00000400
#define __ARBITER 0x00020000
#define __SYSTEM_CONTROL2 0x00040000
#define __SYSTEM_CONTROL3 0x00060000
#define __PARALLEL_PORT 0x00080000
#define __VIDMEM_CONTROL 0x00100000
#define __UPDATE_FIFO 0x00120000
#define __SHMEM_CONTROL1 0x00140000
#define __INTERRUPT_CONTROL 0x00160000
#define __USB_CONTROL 0x00180000
#define __TRACK_INTERFACE 0x001a0000
#define __MOUSE_INTERFACE 0x001b0000
#define __KEYPAD_INTERFACE 0x001c0000
#define __PCMCIA_INTERFACE 0x001e0000
#define __VGA_CONTROL 0x00200000
#define __GPIO_INTERFACE 0x00300000
/*
* Macro that calculates real address for registers in the SA-1101
*/
#define _SA1101( x ) ((x) + SA1101_BASE)
/*
* Interface and shared memory controller registers
*
* Registers
* SKCR SA-1101 control register (read/write)
* SMCR Shared Memory Controller Register
* SNPR Snoop Register
*/
#define _SKCR _SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
#define _SMCR _SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
#define _SNPR _SA1101( 0x00140400 ) /* Snoop Reg. */
#if LANGUAGE == C
#define SKCR (*((volatile Word *) SA1101_p2v (_SKCR)))
#define SMCR (*((volatile Word *) SA1101_p2v (_SMCR)))
#define SNPR (*((volatile Word *) SA1101_p2v (_SNPR)))
#define SKCR_PLLEn 0x0001 /* Enable On-Chip PLL */
#define SKCR_BCLKEn 0x0002 /* Enables BCLK */
#define SKCR_Sleep 0x0004 /* Sleep Mode */
#define SKCR_IRefEn 0x0008 /* DAC Iref input enable */
#define SKCR_VCOON 0x0010 /* VCO bias */
#define SKCR_ScanTestEn 0x0020 /* Enables scan test */
#define SKCR_ClockTestEn 0x0040 /* Enables clock test */
#define SMCR_DCAC Fld(2,0) /* Number of column address bits */
#define SMCR_DRAC Fld(2,2) /* Number of row address bits */
#define SMCR_ArbiterBias 0x0008 /* favor video or USB */
#define SMCR_TopVidMem Fld(4,5) /* Top 4 bits of vidmem addr. */
#define SMCR_ColAdrBits( x ) /* col. addr bits 8..11 */ \
(( (x) - 8 ) << FShft (SMCR_DCAC))
#define SMCR_RowAdrBits( x ) /* row addr bits 9..12 */\
(( (x) - 9 ) << FShft (SMCR_DRAC))
#define SNPR_VFBstart Fld(12,0) /* Video frame buffer addr */
#define SNPR_VFBsize Fld(11,12) /* Video frame buffer size */
#define SNPR_WholeBank (1 << 23) /* Whole bank bit */
#define SNPR_BankSelect Fld(2,27) /* Bank select */
#define SNPR_SnoopEn (1 << 31) /* Enable snoop operation */
#define SNPR_Set_VFBsize( x ) /* set frame buffer size (in kb) */ \
( (x) << FShft (SNPR_VFBsize))
#define SNPR_Select_Bank(x) /* select bank 0 or 1 */ \
(( (x) + 1 ) << FShft (SNPR_BankSelect ))
#endif /* LANGUAGE == C */
/*
* Video Memory Controller
*
* Registers
* VMCCR Configuration register
* VMCAR VMC address register
* VMCDR VMC data register
*
*/
#define _VMCCR _SA1101( 0x00100000 ) /* Configuration register */
#define _VMCAR _SA1101( 0x00101000 ) /* VMC address register */
#define _VMCDR _SA1101( 0x00101400 ) /* VMC data register */
#if LANGUAGE == C
#define VMCCR (*((volatile Word *) SA1101_p2v (_VMCCR)))
#define VMCAR (*((volatile Word *) SA1101_p2v (_VMCAR)))
#define VMCDR (*((volatile Word *) SA1101_p2v (_VMCDR)))
#define VMCCR_RefreshEn 0x0000 /* Enable memory refresh */
#define VMCCR_Config 0x0001 /* DRAM size */
#define VMCCR_RefPeriod Fld(2,3) /* Refresh period */
#define VMCCR_StaleDataWait Fld(4,5) /* Stale FIFO data timeout counter */
#define VMCCR_SleepState (1<<9) /* State of interface pins in sleep*/
#define VMCCR_RefTest (1<<10) /* refresh test */
#define VMCCR_RefLow Fld(6,11) /* refresh low counter */
#define VMCCR_RefHigh Fld(7,17) /* refresh high counter */
#define VMCCR_SDTCTest Fld(7,24) /* stale data timeout counter */
#define VMCCR_ForceSelfRef (1<<31) /* Force self refresh */
#endif LANGUAGE == C
/* Update FIFO
*
* Registers
* UFCR Update FIFO Control Register
* UFSR Update FIFO Status Register
* UFLVLR update FIFO level register
* UFDR update FIFO data register
*/
#define _UFCR _SA1101(0x00120000) /* Update FIFO Control Reg. */
#define _UFSR _SA1101(0x00120400) /* Update FIFO Status Reg. */
#define _UFLVLR _SA1101(0x00120800) /* Update FIFO level reg. */
#define _UFDR _SA1101(0x00120c00) /* Update FIFO data reg. */
#if LANGUAGE == C
#define UFCR (*((volatile Word *) SA1101_p2v (_UFCR)))
#define UFSR (*((volatile Word *) SA1101_p2v (_UFSR)))
#define UFLVLR (*((volatile Word *) SA1101_p2v (_UFLVLR)))
#define UFDR (*((volatile Word *) SA1101_p2v (_UFDR)))
#define UFCR_FifoThreshhold Fld(7,0) /* Level for FifoGTn flag */
#define UFSR_FifoGTnFlag 0x01 /* FifoGTn flag */#define UFSR_FifoEmpty 0x80 /* FIFO is empty */
#endif /* LANGUAGE == C */
/* System Controller
*
* Registers
* SKPCR Power Control Register
* SKCDR Clock Divider Register
* DACDR1 DAC1 Data register
* DACDR2 DAC2 Data register
*/
#define _SKPCR _SA1101(0x00000400)
#define _SKCDR _SA1101(0x00040000)
#define _DACDR1 _SA1101(0x00060000)
#define _DACDR2 _SA1101(0x00060400)
#if LANGUAGE == C
#define SKPCR (*((volatile Word *) SA1101_p2v (_SKPCR)))
#define SKCDR (*((volatile Word *) SA1101_p2v (_SKCDR)))
#define DACDR1 (*((volatile Word *) SA1101_p2v (_DACDR1)))
#define DACDR2 (*((volatile Word *) SA1101_p2v (_DACDR2)))
#define SKPCR_UCLKEn 0x01 /* USB Enable */
#define SKPCR_PCLKEn 0x02 /* PS/2 Enable */
#define SKPCR_ICLKEn 0x04 /* Interrupt Controller Enable */
#define SKPCR_VCLKEn 0x08 /* Video Controller Enable */
#define SKPCR_PICLKEn 0x10 /* parallel port Enable */
#define SKPCR_DCLKEn 0x20 /* DACs Enable */
#define SKPCR_nKPADEn 0x40 /* Multiplexer */
#define SKCDR_PLLMul Fld(7,0) /* PLL Multiplier */
#define SKCDR_VCLKEn Fld(2,7) /* Video controller clock divider */
#define SKDCR_BCLKEn (1<<9) /* BCLK Divider */
#define SKDCR_UTESTCLKEn (1<<10) /* Route USB clock during test mode */
#define SKDCR_DivRValue Fld(6,11) /* Input clock divider for PLL */
#define SKDCR_DivNValue Fld(5,17) /* Output clock divider for PLL */
#define SKDCR_PLLRSH Fld(3,22) /* PLL bandwidth control */
#define SKDCR_ChargePump (1<<25) /* Charge pump control */
#define SKDCR_ClkTestMode (1<<26) /* Clock output test mode */
#define SKDCR_ClkTestEn (1<<27) /* Test clock generator */
#define SKDCR_ClkJitterCntl Fld(3,28) /* video clock jitter compensation */
#define DACDR_DACCount Fld(8,0) /* Count value */
#define DACDR1_DACCount DACDR_DACCount
#define DACDR2_DACCount DACDR_DACCount
#endif /* LANGUAGE == C */
/*
* Parallel Port Interface
*
* Registers
* IEEE_Config IEEE mode selection and programmable attributes
* IEEE_Control Controls the states of IEEE port control outputs
* IEEE_Data Forward transfer data register
* IEEE_Addr Forward transfer address register
* IEEE_Status Port IO signal status register
* IEEE_IntStatus Port interrupts status register
* IEEE_FifoLevels Rx and Tx FIFO interrupt generation levels
* IEEE_InitTime Forward timeout counter initial value
* IEEE_TimerStatus Forward timeout counter current value
* IEEE_FifoReset Reset forward transfer FIFO
* IEEE_ReloadValue Counter reload value
* IEEE_TestControl Control testmode
* IEEE_TestDataIn Test data register
* IEEE_TestDataInEn Enable test data
* IEEE_TestCtrlIn Test control signals
* IEEE_TestCtrlInEn Enable test control signals
* IEEE_TestDataStat Current data bus value
*
*/
/*
* The control registers are defined as offsets from a base address
*/
#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
#define _IEEE_Config _IEEE( 0x0000 )
#define _IEEE_Control _IEEE( 0x0400 )
#define _IEEE_Data _IEEE( 0x4000 )
#define _IEEE_Addr _IEEE( 0x0800 )
#define _IEEE_Status _IEEE( 0x0c00 )
#define _IEEE_IntStatus _IEEE( 0x1000 )
#define _IEEE_FifoLevels _IEEE( 0x1400 )
#define _IEEE_InitTime _IEEE( 0x1800 )
#define _IEEE_TimerStatus _IEEE( 0x1c00 )
#define _IEEE_FifoReset _IEEE( 0x2000 )
#define _IEEE_ReloadValue _IEEE( 0x3c00 )
#define _IEEE_TestControl _IEEE( 0x2400 )
#define _IEEE_TestDataIn _IEEE( 0x2800 )
#define _IEEE_TestDataInEn _IEEE( 0x2c00 )
#define _IEEE_TestCtrlIn _IEEE( 0x3000 )
#define _IEEE_TestCtrlInEn _IEEE( 0x3400 )
#define _IEEE_TestDataStat _IEEE( 0x3800 )
#if LANGUAGE == C
#define IEEE_Config (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
#define IEEE_Control (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
#define IEEE_Data (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
#define IEEE_Addr (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
#define IEEE_Status (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
#define IEEE_IntStatus (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
#define IEEE_FifoLevels (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
#define IEEE_InitTime (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
#define IEEE_TimerStatus (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
#define IEEE_FifoReset (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
#define IEEE_ReloadValue (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
#define IEEE_TestControl (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
#define IEEE_TestDataIn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
#define IEEE_TestDataInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
#define IEEE_TestCtrlIn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
#define IEEE_TestCtrlInEn (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
#define IEEE_TestDataStat (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
#define IEEE_Config_M Fld(3,0) /* Mode select */
#define IEEE_Config_D 0x04 /* FIFO access enable */
#define IEEE_Config_B 0x08 /* 9-bit word enable */
#define IEEE_Config_T 0x10 /* Data transfer enable */
#define IEEE_Config_A 0x20 /* Data transfer direction */
#define IEEE_Config_E 0x40 /* Timer enable */
#define IEEE_Control_A 0x08 /* AutoFd output */
#define IEEE_Control_E 0x04 /* Selectin output */
#define IEEE_Control_T 0x02 /* Strobe output */
#define IEEE_Control_I 0x01 /* Port init output */
#define IEEE_Data_C (1<<31) /* Byte count */
#define IEEE_Data_Db Fld(9,16) /* Data byte 2 */
#define IEEE_Data_Da Fld(9,0) /* Data byte 1 */
#define IEEE_Addr_A Fld(8,0) /* forward address transfer byte */
#define IEEE_Status_A 0x0100 /* nAutoFd port output status */
#define IEEE_Status_E 0x0080 /* nSelectIn port output status */
#define IEEE_Status_T 0x0040 /* nStrobe port output status */
#define IEEE_Status_I 0x0020 /* nInit port output status */
#define IEEE_Status_B 0x0010 /* Busy port inout status */
#define IEEE_Status_S 0x0008 /* Select port input status */
#define IEEE_Status_K 0x0004 /* nAck port input status */
#define IEEE_Status_F 0x0002 /* nFault port input status */
#define IEEE_Status_R 0x0001 /* pError port input status */
#define IEEE_IntStatus_IntReqDat 0x0100
#define IEEE_IntStatus_IntReqEmp 0x0080
#define IEEE_IntStatus_IntReqInt 0x0040
#define IEEE_IntStatus_IntReqRav 0x0020
#define IEEE_IntStatus_IntReqTim 0x0010
#define IEEE_IntStatus_RevAddrComp 0x0008
#define IEEE_IntStatus_RevDataComp 0x0004
#define IEEE_IntStatus_FwdAddrComp 0x0002
#define IEEE_IntStatus_FwdDataComp 0x0001
#define IEEE_FifoLevels_RevFifoLevel 2
#define IEEE_FifoLevels_FwdFifoLevel 1
#define IEEE_InitTime_TimValInit Fld(22,0)
#define IEEE_TimerStatus_TimValStat Fld(22,0)
#define IEEE_ReloadValue_Reload Fld(4,0)
#define IEEE_TestControl_RegClk 0x04
#define IEEE_TestControl_ClockSelect Fld(2,1)
#define IEEE_TestControl_TimerTestModeEn 0x01
#define IEEE_TestCtrlIn_PError 0x10
#define IEEE_TestCtrlIn_nFault 0x08
#define IEEE_TestCtrlIn_nAck 0x04
#define IEEE_TestCtrlIn_PSel 0x02
#define IEEE_TestCtrlIn_Busy 0x01
#endif /* LANGUAGE == C */
/*
* VGA Controller
*
* Registers
* VideoControl Video Control Register
* VgaTiming0 VGA Timing Register 0
* VgaTiming1 VGA Timing Register 1
* VgaTiming2 VGA Timing Register 2
* VgaTiming3 VGA Timing Register 3
* VgaBorder VGA Border Color Register
* VgaDBAR VGADMA Base Address Register
* VgaDCAR VGADMA Channel Current Address Register
* VgaStatus VGA Status Register
* VgaInterruptMask VGA Interrupt Mask Register
* VgaPalette VGA Palette Registers
* DacControl DAC Control Register
* VgaTest VGA Controller Test Register
*/
#define _VGA( x ) _SA1101( ( x ) + __VGA_CONTROL )
#define _VideoControl _VGA( 0x0000 )
#define _VgaTiming0 _VGA( 0x0400 )
#define _VgaTiming1 _VGA( 0x0800 )
#define _VgaTiming2 _VGA( 0x0c00 )
#define _VgaTiming3 _VGA( 0x1000 )
#define _VgaBorder _VGA( 0x1400 )
#define _VgaDBAR _VGA( 0x1800 )
#define _VgaDCAR _VGA( 0x1c00 )
#define _VgaStatus _VGA( 0x2000 )
#define _VgaInterruptMask _VGA( 0x2400 )
#define _VgaPalette _VGA( 0x40000 )
#define _DacControl _VGA( 0x3000 )
#define _VgaTest _VGA( 0x2c00 )
#if (LANGUAGE == C)
#define VideoControl (*((volatile Word *) SA1101_p2v (_VideoControl)))
#define VgaTiming0 (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
#define VgaTiming1 (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
#define VgaTiming2 (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
#define VgaTiming3 (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
#define VgaBorder (*((volatile Word *) SA1101_p2v (_VgaBorder)))
#define VgaDBAR (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
#define VgaDCAR (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
#define VgaStatus (*((volatile Word *) SA1101_p2v (_VgaStatus)))
#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
#define VgaPalette (*((volatile Word *) SA1101_p2v (_VgaPalette)))
#define DacControl (*((volatile Word *) SA1101_p2v (_DacControl)))
#define VgaTest (*((volatile Word *) SA1101_p2v (_VgaTest)))
#define VideoControl_VgaEn 0x00000000
#define VideoControl_BGR 0x00000001
#define VideoControl_VCompVal Fld(2,2)
#define VideoControl_VgaReq Fld(4,4)
#define VideoControl_VBurstL Fld(4,8)
#define VideoControl_VMode (1<<12)
#define VideoControl_PalRead (1<<13)
#define VgaTiming0_PPL Fld(6,2)
#define VgaTiming0_HSW Fld(8,8)
#define VgaTiming0_HFP Fld(8,16)
#define VgaTiming0_HBP Fld(8,24)
#define VgaTiming1_LPS Fld(10,0)
#define VgaTiming1_VSW Fld(6,10)
#define VgaTiming1_VFP Fld(8,16)
#define VgaTiming1_VBP Fld(8,24)
#define VgaTiming2_IVS 0x01
#define VgaTiming2_IHS 0x02
#define VgaTiming2_CVS 0x04
#define VgaTiming2_CHS 0x08
#define VgaTiming3_HBS Fld(8,0)
#define VgaTiming3_HBE Fld(8,8)
#define VgaTiming3_VBS Fld(8,16)
#define VgaTiming3_VBE Fld(8,24)
#define VgaBorder_BCOL Fld(24,0)
#define VgaStatus_VFUF 0x01
#define VgaStatus_VNext 0x02
#define VgaStatus_VComp 0x04
#define VgaInterruptMask_VFUFMask 0x00
#define VgaInterruptMask_VNextMask 0x01
#define VgaInterruptMask_VCompMask 0x02
#define VgaPalette_R Fld(8,0)
#define VgaPalette_G Fld(8,8)
#define VgaPalette_B Fld(8,16)
#define DacControl_DACON 0x0001
#define DacControl_COMPON 0x0002
#define DacControl_PEDON 0x0004
#define DacControl_RTrim Fld(5,4)
#define DacControl_GTrim Fld(5,9)
#define DacControl_BTrim Fld(5,14)
#define VgaTest_TDAC 0x00
#define VgaTest_Datatest Fld(4,1)
#define VgaTest_DACTESTDAC 0x10
#define VgaTest_DACTESTOUT Fld(3,5)
#endif /* LANGUAGE == C */
/*
* USB Host Interface Controller
*
* Registers
* Revision
* Control
* CommandStatus
* InterruptStatus
* InterruptEnable
* HCCA
* PeriodCurrentED
* ControlHeadED
* BulkHeadED
* BulkCurrentED
* DoneHead
* FmInterval
* FmRemaining
* FmNumber
* PeriodicStart
* LSThreshold
* RhDescriptorA
* RhDescriptorB
* RhStatus
* RhPortStatus
* USBStatus
* USBReset
* USTAR
* USWER
* USRFR
* USNFR
* USTCSR
* USSR
*
*/
#define _USB( x ) _SA1101( ( x ) + __USB_CONTROL )
#define _Revision _USB( 0x0000 )
#define _Control _USB( 0x0888 )
#define _CommandStatus _USB( 0x0c00 )
#define _InterruptStatus _USB( 0x1000 )
#define _InterruptEnable _USB( 0x1400 )
#define _HCCA _USB( 0x1800 )
#define _PeriodCurrentED _USB( 0x1c00 )
#define _ControlHeadED _USB( 0x2000 )
#define _BulkHeadED _USB( 0x2800 )
#define _BulkCurrentED _USB( 0x2c00 )
#define _DoneHead _USB( 0x3000 )
#define _FmInterval _USB( 0x3400 )
#define _FmRemaining _USB( 0x3800 )
#define _FmNumber _USB( 0x3c00 )
#define _PeriodicStart _USB( 0x4000 )
#define _LSThreshold _USB( 0x4400 )
#define _RhDescriptorA _USB( 0x4800 )
#define _RhDescriptorB _USB( 0x4c00 )
#define _RhStatus _USB( 0x5000 )
#define _RhPortStatus _USB( 0x5400 )
#define _USBStatus _USB( 0x11800 )
#define _USBReset _USB( 0x11c00 )
#define _USTAR _USB( 0x10400 )
#define _USWER _USB( 0x10800 )
#define _USRFR _USB( 0x10c00 )
#define _USNFR _USB( 0x11000 )
#define _USTCSR _USB( 0x11400 )
#define _USSR _USB( 0x11800 )
#if (LANGUAGE == C)
#define Revision (*((volatile Word *) SA1101_p2v (_Revision)))
#define Control (*((volatile Word *) SA1101_p2v (_Control)))
#define CommandStatus (*((volatile Word *) SA1101_p2v (_CommandStatus)))
#define InterruptStatus (*((volatile Word *) SA1101_p2v (_InterruptStatus)))
#define InterruptEnable (*((volatile Word *) SA1101_p2v (_InterruptEnable)))
#define HCCA (*((volatile Word *) SA1101_p2v (_HCCA)))
#define PeriodCurrentED (*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
#define ControlHeadED (*((volatile Word *) SA1101_p2v (_ControlHeadED)))
#define BulkHeadED (*((volatile Word *) SA1101_p2v (_BulkHeadED)))
#define BulkCurrentED (*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
#define DoneHead (*((volatile Word *) SA1101_p2v (_DoneHead)))
#define FmInterval (*((volatile Word *) SA1101_p2v (_FmInterval)))
#define FmRemaining (*((volatile Word *) SA1101_p2v (_FmRemaining)))
#define FmNumber (*((volatile Word *) SA1101_p2v (_FmNumber)))
#define PeriodicStart (*((volatile Word *) SA1101_p2v (_PeriodicStart)))
#define LSThreshold (*((volatile Word *) SA1101_p2v (_LSThreshold)))
#define RhDescriptorA (*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
#define RhDescriptorB (*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
#define RhStatus (*((volatile Word *) SA1101_p2v (_RhStatus)))
#define RhPortStatus (*((volatile Word *) SA1101_p2v (_RhPortStatus)))
#define USBStatus (*((volatile Word *) SA1101_p2v (_USBStatus)))
#define USBReset (*((volatile Word *) SA1101_p2v (_USBReset)))
#define USTAR (*((volatile Word *) SA1101_p2v (_USTAR)))
#define USWER (*((volatile Word *) SA1101_p2v (_USWER)))
#define USRFR (*((volatile Word *) SA1101_p2v (_USRFR)))
#define USNFR (*((volatile Word *) SA1101_p2v (_USNFR)))
#define USTCSR (*((volatile Word *) SA1101_p2v (_USTCSR)))
#define USSR (*((volatile Word *) SA1101_p2v (_USSR)))
#define USBStatus_IrqHciRmtWkp (1<<7)
#define USBStatus_IrqHciBuffAcc (1<<8)
#define USBStatus_nIrqHciM (1<<9)
#define USBStatus_nHciMFClr (1<<10)
#define USBReset_ForceIfReset 0x01
#define USBReset_ForceHcReset 0x02
#define USBReset_ClkGenReset 0x04
#define USTCR_RdBstCntrl Fld(3,0)
#define USTCR_ByteEnable Fld(4,3)
#define USTCR_WriteEn (1<<7)
#define USTCR_FifoCir (1<<8)
#define USTCR_TestXferSel (1<<9)
#define USTCR_FifoCirAtEnd (1<<10)
#define USTCR_nSimScaleDownClk (1<<11)
#define USSR_nAppMDEmpty 0x01
#define USSR_nAppMDFirst 0x02
#define USSR_nAppMDLast 0x04
#define USSR_nAppMDFull 0x08
#define USSR_nAppMAFull 0x10
#define USSR_XferReq 0x20
#define USSR_XferEnd 0x40
#endif /* LANGUAGE == C */
/*
* Interrupt Controller
*
* Registers
* INTTEST0 Test register 0
* INTTEST1 Test register 1
* INTENABLE0 Interrupt Enable register 0
* INTENABLE1 Interrupt Enable register 1
* INTPOL0 Interrupt Polarity selection 0
* INTPOL1 Interrupt Polarity selection 1
* INTTSTSEL Interrupt source selection
* INTSTATCLR0 Interrupt Status 0
* INTSTATCLR1 Interrupt Status 1
* INTSET0 Interrupt Set 0
* INTSET1 Interrupt Set 1
*/
#define _INT( x ) _SA1101( ( x ) + __INTERRUPT_CONTROL)
#define _INTTEST0 _INT( 0x1000 )
#define _INTTEST1 _INT( 0x1400 )
#define _INTENABLE0 _INT( 0x2000 )
#define _INTENABLE1 _INT( 0x2400 )
#define _INTPOL0 _INT( 0x3000 )
#define _INTPOL1 _INT( 0x3400 )
#define _INTTSTSEL _INT( 0x5000 )
#define _INTSTATCLR0 _INT( 0x6000 )
#define _INTSTATCLR1 _INT( 0x6400 )
#define _INTSET0 _INT( 0x7000 )
#define _INTSET1 _INT( 0x7400 )
#if ( LANGUAGE == C )
#define INTTEST0 (*((volatile Word *) SA1101_p2v (_INTTEST0)))
#define INTTEST1 (*((volatile Word *) SA1101_p2v (_INTTEST1)))
#define INTENABLE0 (*((volatile Word *) SA1101_p2v (_INTENABLE0)))
#define INTENABLE1 (*((volatile Word *) SA1101_p2v (_INTENABLE1)))
#define INTPOL0 (*((volatile Word *) SA1101_p2v (_INTPOL0)))
#define INTPOL1 (*((volatile Word *) SA1101_p2v (_INTPOL1)))
#define INTTSTSEL (*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
#define INTSTATCLR0 (*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
#define INTSTATCLR1 (*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
#define INTSET0 (*((volatile Word *) SA1101_p2v (_INTSET0)))
#define INTSET1 (*((volatile Word *) SA1101_p2v (_INTSET1)))
#endif /* LANGUAGE == C */
/*
* PS/2 Trackpad and Mouse Interfaces
*
* Registers (prefix kbd applies to trackpad interface, mse to mouse)
* KBDCR Control Register
* KBDSTAT Status Register
* KBDDATA Transmit/Receive Data register
* KBDCLKDIV Clock Division Register
* KBDPRECNT Clock Precount Register
* KBDTEST1 Test register 1
* KBDTEST2 Test register 2
* KBDTEST3 Test register 3
* KBDTEST4 Test register 4
* MSECR
* MSESTAT
* MSEDATA
* MSECLKDIV
* MSEPRECNT
* MSETEST1
* MSETEST2
* MSETEST3
* MSETEST4
*
*/
#define _KBD( x ) _SA1101( ( x ) + __TRACK_INTERFACE )
#define _MSE( x ) _SA1101( ( x ) + __MOUSE_INTERFACE )
#define _KBDCR _KBD( 0x0000 )
#define _KBDSTAT _KBD( 0x0400 )
#define _KBDDATA _KBD( 0x0800 )
#define _KBDCLKDIV _KBD( 0x0c00 )
#define _KBDPRECNT _KBD( 0x1000 )
#define _KBDTEST1 _KBD( 0x2000 )
#define _KBDTEST2 _KBD( 0x2400 )
#define _KBDTEST3 _KBD( 0x2800 )
#define _KBDTEST4 _KBD( 0x2c00 )
#define _MSECR _MSE( 0x0000 )
#define _MSESTAT _MSE( 0x0400 )
#define _MSEDATA _MSE( 0x0800 )
#define _MSECLKDIV _MSE( 0x0c00 )
#define _MSEPRECNT _MSE( 0x1000 )
#define _MSETEST1 _MSE( 0x2000 )
#define _MSETEST2 _MSE( 0x2400 )
#define _MSETEST3 _MSE( 0x2800 )
#define _MSETEST4 _MSE( 0x2c00 )
#if ( LANGUAGE == C )
#define KBDCR (*((volatile Word *) SA1101_p2v (_KBDCR)))
#define KBDSTAT (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
#define KBDDATA (*((volatile Word *) SA1101_p2v (_KBDDATA)))
#define KBDCLKDIV (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
#define KBDPRECNT (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
#define KBDTEST1 (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
#define KBDTEST2 (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
#define KBDTEST3 (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
#define KBDTEST4 (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
#define MSECR (*((volatile Word *) SA1101_p2v (_MSECR)))
#define MSESTAT (*((volatile Word *) SA1101_p2v (_MSESTAT)))
#define MSEDATA (*((volatile Word *) SA1101_p2v (_MSEDATA)))
#define MSECLKDIV (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
#define MSEPRECNT (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
#define MSETEST1 (*((volatile Word *) SA1101_p2v (_MSETEST1)))
#define MSETEST2 (*((volatile Word *) SA1101_p2v (_MSETEST2)))
#define MSETEST3 (*((volatile Word *) SA1101_p2v (_MSETEST3)))
#define MSETEST4 (*((volatile Word *) SA1101_p2v (_MSETEST4)))
#define KBDCR_ENA 0x08
#define KBDCR_FKD 0x02
#define KBDCR_FKC 0x01
#define KBDSTAT_TXE 0x80
#define KBDSTAT_TXB 0x40
#define KBDSTAT_RXF 0x20
#define KBDSTAT_RXB 0x10
#define KBDSTAT_ENA 0x08
#define KBDSTAT_RXP 0x04
#define KBDSTAT_KBD 0x02
#define KBDSTAT_KBC 0x01
#define KBDCLKDIV_DivVal Fld(4,0)
#define MSECR_ENA 0x08
#define MSECR_FKD 0x02
#define MSECR_FKC 0x01
#define MSESTAT_TXE 0x80
#define MSESTAT_TXB 0x40
#define MSESTAT_RXF 0x20
#define MSESTAT_RXB 0x10
#define MSESTAT_ENA 0x08
#define MSESTAT_RXP 0x04
#define MSESTAT_MSD 0x02
#define MSESTAT_MSC 0x01
#define MSECLKDIV_DivVal Fld(4,0)
#define KBDTEST1_CD 0x80
#define KBDTEST1_RC1 0x40
#define KBDTEST1_MC 0x20
#define KBDTEST1_C Fld(2,3)
#define KBDTEST1_T2 0x40
#define KBDTEST1_T1 0x20
#define KBDTEST1_T0 0x10
#define KBDTEST2_TICBnRES 0x08
#define KBDTEST2_RKC 0x04
#define KBDTEST2_RKD 0x02
#define KBDTEST2_SEL 0x01
#define KBDTEST3_ms_16 0x80
#define KBDTEST3_us_64 0x40
#define KBDTEST3_us_16 0x20
#define KBDTEST3_DIV8 0x10
#define KBDTEST3_DIn 0x08
#define KBDTEST3_CIn 0x04
#define KBDTEST3_KD 0x02
#define KBDTEST3_KC 0x01
#define KBDTEST4_BC12 0x80
#define KBDTEST4_BC11 0x40
#define KBDTEST4_TRES 0x20
#define KBDTEST4_CLKOE 0x10
#define KBDTEST4_CRES 0x08
#define KBDTEST4_RXB 0x04
#define KBDTEST4_TXB 0x02
#define KBDTEST4_SRX 0x01
#define MSETEST1_CD 0x80
#define MSETEST1_RC1 0x40
#define MSETEST1_MC 0x20
#define MSETEST1_C Fld(2,3)
#define MSETEST1_T2 0x40
#define MSETEST1_T1 0x20
#define MSETEST1_T0 0x10
#define MSETEST2_TICBnRES 0x08
#define MSETEST2_RKC 0x04
#define MSETEST2_RKD 0x02
#define MSETEST2_SEL 0x01
#define MSETEST3_ms_16 0x80
#define MSETEST3_us_64 0x40
#define MSETEST3_us_16 0x20
#define MSETEST3_DIV8 0x10
#define MSETEST3_DIn 0x08
#define MSETEST3_CIn 0x04
#define MSETEST3_KD 0x02
#define MSETEST3_KC 0x01
#define MSETEST4_BC12 0x80
#define MSETEST4_BC11 0x40
#define MSETEST4_TRES 0x20
#define MSETEST4_CLKOE 0x10
#define MSETEST4_CRES 0x08
#define MSETEST4_RXB 0x04
#define MSETEST4_TXB 0x02
#define MSETEST4_SRX 0x01
#endif /* LANGUAGE == C */
/*
* General-Purpose I/O Interface
*
* Registers
* PADWR Port A Data Write Register
* PBDWR Port B Data Write Register
* PADRR Port A Data Read Register
* PBDRR Port B Data Read Register
* PADDR Port A Data Direction Register
* PBDDR Port B Data Direction Register
* PASSR Port A Sleep State Register
* PBSSR Port B Sleep State Register
*
*/
#define _PIO( x ) _SA1101( ( x ) + __GPIO_INTERFACE )
#define _PADWR _PIO( 0x0000 )
#define _PBDWR _PIO( 0x0400 )
#define _PADRR _PIO( 0x0000 )
#define _PBDRR _PIO( 0x0400 )
#define _PADDR _PIO( 0x0800 )
#define _PBDDR _PIO( 0x0c00 )
#define _PASSR _PIO( 0x1000 )
#define _PBSSR _PIO( 0x1400 )
#if ( LANGUAGE == C )
#define PADWR (*((volatile Word *) SA1101_p2v (_PADWR)))
#define PBDWR (*((volatile Word *) SA1101_p2v (_PBDWR)))
#define PADRR (*((volatile Word *) SA1101_p2v (_PADRR)))
#define PBDRR (*((volatile Word *) SA1101_p2v (_PBDRR)))
#define PADDR (*((volatile Word *) SA1101_p2v (_PADDR)))
#define PBDDR (*((volatile Word *) SA1101_p2v (_PBDDR)))
#define PASSR (*((volatile Word *) SA1101_p2v (_PASSR)))
#define PBSSR (*((volatile Word *) SA1101_p2v (_PBSSR)))
#endif
/*
* Keypad Interface
*
* Registers
* PXDWR
* PXDRR
* PYDWR
* PYDRR
*
*/
#define _KEYPAD( x ) _SA1101( ( x ) + __KEYPAD_INTERFACE )
#define _PXDWR _KEYPAD( 0x0000 )
#define _PXDRR _KEYPAD( 0x0000 )
#define _PYDWR _KEYPAD( 0x0400 )
#define _PYDRR _KEYPAD( 0x0400 )
#if ( LANGUAGE == C )
#define PXDWR (*((volatile Word *) SA1101_p2v (_PXDWR)))
#define PXDRR (*((volatile Word *) SA1101_p2v (_PXDRR)))
#define PYDWR (*((volatile Word *) SA1101_p2v (_PYDWR)))
#define PYDRR (*((volatile Word *) SA1101_p2v (_PYDRR)))
#endif
/*
* PCMCIA Interface
*
* Registers
* PCSR Status Register
* PCCR Control Register
* PCSSR Sleep State Register
*
*/
#define _CARD( x ) _SA1101( ( x ) + __PCMCIA_INTERFACE )
#define _PCSR _CARD( 0x0000 )
#define _PCCR _CARD( 0x0400 )
#define _PCSSR _CARD( 0x0800 )
#if ( LANGUAGE == C )
#define PCSR (*((volatile Word *) SA1101_p2v (_PCSR)))
#define PCCR (*((volatile Word *) SA1101_p2v (_PCCR)))
#define PCSSR (*((volatile Word *) SA1101_p2v (_PCSSR)))
#define PCSR_S0_ready 0x0001
#define PCSR_S1_ready 0x0002
#define PCSR_S0_detected 0x0004
#define PCSR_S1_detected 0x0008
#define PCSR_S0_VS1 0x0010
#define PCSR_S0_VS2 0x0020
#define PCSR_S1_VS1 0x0040
#define PCSR_S1_VS2 0x0080
#define PCSR_S0_WP 0x0100
#define PCSR_S1_WP 0x0200
#define PCSR_S0_BVD1_nSTSCHG 0x0400
#define PCSR_S0_BVD2_nSPKR 0x0800
#define PCSR_S1_BVD1_nSTSCHG 0x1000
#define PCSR_S1_BVD2_nSPKR 0x2000
#define PCCR_S0_VPP0 0x0001
#define PCCR_S0_VPP1 0x0002
#define PCCR_S0_VCC0 0x0004
#define PCCR_S0_VCC1 0x0008
#define PCCR_S1_VPP0 0x0010
#define PCCR_S1_VPP1 0x0020
#define PCCR_S1_VCC0 0x0040
#define PCCR_S1_VCC1 0x0080
#define PCCR_S0_reset 0x0100
#define PCCR_S1_reset 0x0200
#define PCCR_S0_float 0x0400
#define PCCR_S1_float 0x0800
#define PCSSR_S0_VCC0 0x0001
#define PCSSR_S0_VCC1 0x0002
#define PCSSR_S0_VPP0 0x0004
#define PCSSR_S0_VPP1 0x0008
#define PCSSR_S0_control 0x0010
#define PCSSR_S1_VCC0 0x0020
#define PCSSR_S1_VCC1 0x0040
#define PCSSR_S1_VPP0 0x0080
#define PCSSR_S1_VPP1 0x0100
#define PCSSR_S1_control 0x0200
#endif
#undef C
#undef Assembly
